Skip to content
TapBuff

Timberline Village

What EPA’s and CDC’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
95 people
Connections
38
Water source
Groundwater
Based in
Fairfield, ME
County
Somerset
Owner
Private
The ZIP code it serves

04937

The short answer

2 results are above the health goal. The worst: Arsenic, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Arsenic, nitrate, haloacetic acids (HAA5) and total trihalomethanes (TTHM): Maine’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023, with EPA’s 2012 to 2019 file for earlier years.

Uranium, chromium (total) and fluoride: EPA’s compliance monitoring file, samples taken from May 21, 2014 to March 29, 2017. Newer results are in the utility’s annual water quality report.

Above the health goal2

Arsenic

Comes from the source

Above the health goal

2.3ppb

Highest yearly average, 2020

Averaged by year, the highest was 2.3 ppb, in 2020: below EPA’s legal limit of 10 ppb, but above its health goal of zero. That is the only year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 2.4 ppb, in 2014.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”

Uranium

Comes from the source

Above the health goal

1.1ppb

Highest yearly average, 2017

Averaged by year, the highest was 1.1 ppb, in 2017: below EPA’s legal limit of 30 ppb, but above its health goal of zero. That is the only year on file.

What handles it

Below EPA’s limits2

Nitrate

Comes from the source

Below EPA’s limits

0.29ppm

Highest yearly average, 2020 to 2023

2023: not found

Averaged by year, the highest was 0.29 ppm, in 2021, below EPA’s legal limit of 10 ppm. In 2023, the latest year on file, it wasn’t found. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 0.28 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Chromium (total)

Comes from the source

Below EPA’s limits

0.71ppb

Highest yearly average, 2014 to 2017

2017: not found

Averaged by year, the highest was 0.71 ppb, in 2014, below EPA’s legal limit of 100 ppb. In 2017, the latest year on file, it wasn’t found in its one sample.

What handles it

4 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Fluoride
  • Haloacetic acids (HAA5)
  • Lead
  • Total trihalomethanes (TTHM)

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

  • NSF/ANSI 53

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other certifiers’ wording: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Uranium

    For: Arsenic, Uranium

    Other certifiers’ wording: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best reverse osmosis systems, ranked

Violations since 2016

No health-based violations on file with EPA since 2016. There are 34 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Arsenic, nitrate, haloacetic acids (HAA5) and total trihalomethanes (TTHM) results here are Maine’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Uranium, chromium (total) and fluoride come from EPA’s file alone, which ends in 2019. Timberline Village’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; CDC’s yearly averages for Maine cover 2020 to 2023; EPA’s compliance samples are from May 21, 2014 to March 29, 2017.

Testing your own tap

Timberline Village’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Maine certifies.

The 3 labs Maine certifies closest to the area Timberline Village serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

Maine Health and Environmental Testing Laboratory: Well water test kits ordered online, from a bacteria-only test to full panels for new wells and home sales. The lab must receive the sample within 30 hours of collection. The basic safety test is $42, bacteria alone $27, first-draw lead $32, and the fuller well tests $127 to $147. Maine Private Well and Radiological Water and Air Test.

All 53 certified labs for Maine

Sources

PWSID ME0095610. Rebuilt from EPA data on Oct. 18, 2026.