Skip to content
TapBuff

City of Hammond Water System

EPA’s and Louisiana’s records have results for 38 contaminants in its water; 5 were found.

Serves 21,135 people · Groundwater · Hammond, LA

Serves
21,135 people
Connections
7,049
Water source
Groundwater
Based in
Hammond, LA
County
Tangipahoa Parish
Owner
Local government
The 3 ZIP codes it serves

70401, 70402, 70403

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 2 health-based violations since 2016, both resolved in EPA’s file.

Filters for lead, if you want it lower⁠The 2 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Dec. 4, 2024 to July 9, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2007 to 2026.

Total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), nitrate, arsenic, chromium (total) and uranium: Louisiana’s own results, samples taken from April 27, 2020 to May 7, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 5 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Lead, Action level 15 ppb · health goal zero; 90th percentile 2.0 ppb

90th percentile, 2024 to 2026 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 2.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 10.1 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 2.5 ppb · Forms or is added in treatment

Averaged by year, the highest was 10.1 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 12.9 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 25.4 ppb, in 2016.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.5 ppm

Highest yearly average, 2021 to 2025 · 2025, one sample: 0.5 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.5 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. In 2025, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.5 ppm, in 2019.

What handles it

About fluoride
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 5.0 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 2.6 ppb · Forms or is added in treatment

Averaged by year, the highest was 5.0 ppb, in 2023, below EPA’s legal limit of 60 ppb. Its highest single sample was 7.6 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 8.4 ppb, in 2015.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Nitrate, Legal limit 10 ppm; highest 0.3 ppm

Highest sample; found in 9 of 35 · 2026: not found · Comes from the source

The highest sample, in 2023, was 0.3 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, it wasn’t found in any of its five samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.1 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Utilities above EPA’s PFAS limits, state by state⁠
33 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

2 health-based violations since 2016, all for chlorine dioxide. The latest began Sept. 1, 2016.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Chlorine dioxideNon-Acute MRDLSept. 1, 2016 to Sept. 30, 2016Resolved
Chlorine dioxideThe disinfectant was above its maximum allowed level.EPA: Acute Maximum Residual Disinfectant LevelSept. 1, 2016 to Sept. 30, 2016Resolved

Health-based violations only.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for lead, ranked⁠

Disinfectant

City of Hammond Water System reported adding chloramine before water enters its pipes, at all 5 of its sampling points, in its 2024 to 2025 sampling for EPA.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), nitrate, arsenic, chromium (total) and uranium results here are Louisiana’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Hammond Water System’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Dec. 4, 2024 to July 9, 2025; Louisiana’s results run from April 27, 2020 to May 7, 2026.

Testing your own tap

City of Hammond Water System’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Louisiana certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Hammond Water System’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 2.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Louisiana certifies closest to the area City of Hammond Water System serves, or a kit by mail

The 3 labs Louisiana certifies closest to the area City of Hammond Water System serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • LDH Amite Regional Laboratory

    Amite, LA · about 15 miles

    Certified for bacteria

    (985) 748-2011

  • Water Test, Inc.

    Covington, LA · about 20 miles

    Certified for bacteria

    (985) 892-8329

  • Curtis Environmental Services, Inc.

    LaPlace, LA · about 25 miles

    Certified for minerals and other inorganics, disinfection byproducts

All 48 certified labs for Louisiana⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Louisiana certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Louisiana’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID LA1105009. Rebuilt from EPA data on Oct. 25, 2026.