Skip to content
TapBuff

City of Mountain Home

EPA’s records have results for 38 contaminants in its water; 7 were found.

Serves 14,651 people · Groundwater · Mountain Home, ID

Serves
14,651 people
Connections
5,842
Water source
Groundwater
Based in
Mountain Home, ID
County
Elmore
Owner
Local government
The ZIP code it serves

83647

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 3 health-based violations since 2016, all resolved in EPA’s file.

Filters for arsenic and uranium, if you want them lower⁠The 3 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Nov. 28, 2023 to Oct. 17, 2025.

Arsenic, nitrate, fluoride, total trihalomethanes (TTHM), chromium (total), uranium and haloacetic acids (HAA5): EPA’s compliance monitoring file, samples taken from March 7, 2012 to Aug. 20, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 7 results

Arsenic and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 6.0 ppb

Highest yearly average, 2013 to 2019 · Comes from the source

Averaged by year, the highest was 6.0 ppb, in 2019, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 6.5 ppb. That was also the latest year on file.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Nitrate, Legal limit 10 ppm; highest 2.3 ppm

Highest sample; found in 68 of 68 · 2019 average: 1.3 ppm · Comes from the source

The highest sample, in 2018, was 2.3 ppm, below EPA’s legal limit of 10 ppm. In 2019, the latest year on file, its eight samples averaged below the limit.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.91 ppm

Highest yearly average, 2013 to 2019 · 2019 average: 0.39 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.91 ppm, in 2018, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.8 ppm. In 2019, the latest year on file, its two samples averaged below the limit.

What handles it

About fluoride
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 4.7 ppb

Highest yearly average, 2012 to 2019 · 2019 average: 0.8 ppb · Forms or is added in treatment

Averaged by year, the highest was 4.7 ppb, in 2016, below EPA’s legal limit of 80 ppb. Its highest single sample was 14 ppb. In 2019, the latest year on file, its four samples averaged below the limit.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Chromium (total), Legal limit 100 ppb; highest yearly average 3.5 ppb

Highest yearly average, 2013 to 2019 · 2019: not found · Comes from the source

Averaged by year, the highest was 3.5 ppb, in 2013, below EPA’s legal limit of 100 ppb. Its highest single sample was 4.0 ppb. In 2019, the latest year on file, it wasn’t found in any of its two samples.

What handles it

About chromium (total)
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 0.8 ppb

Highest yearly average, 2012 to 2019 · 2019: not found · Comes from the source

Averaged by year, the highest was 0.8 ppb, in 2012, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 2.0 ppb. In 2019, the latest year on file, it wasn’t found in any of its three samples.

What handles it

About uranium
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 0.57 ppb

Highest yearly average, 2012 to 2019 · 2019: not found · Forms or is added in treatment

Averaged by year, the highest was 0.57 ppb, in 2016, below EPA’s legal limit of 60 ppb. Its highest single sample was 3.4 ppb. In 2019, the latest year on file, it wasn’t found in any of its four samples.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Utilities above EPA’s PFAS limits, state by state⁠
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

3 health-based violations since 2016, 2 for the Revised Total Coliform Rule and 1 for the Lead and Copper Rule Revisions. The latest began Aug. 1, 2025.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Revised Total Coliform RuleColiform results required a check of the system, and the check or its fixes were not done on time.EPA: Treatment Technique, Level 1 Assessment (RTCR)Aug. 1, 2025Resolved
Lead and Copper Rule RevisionsThe required inventory of lead service lines was not completed or submitted on time.EPA: LSL InventoryOct. 17, 2024Resolved
Revised Total Coliform RuleColiform results required a check of the system, and the check or its fixes were not done on time.EPA: Treatment Technique, Level 1 Assessment (RTCR)Aug. 12, 2017Resolved

Health-based violations only. 150 monitoring or reporting violations not shown.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Uranium

    For: Arsenic, Uranium

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

One more filter
Compare five-year costs

Every filter for these, those that cover both first⁠

The best reverse osmosis systems, ranked⁠

Disinfectant

City of Mountain Home reported chloramine in some sampling rounds and not in others, in its 2023 to 2025 sampling for EPA. Of its 9 sampling points, 1 in some rounds only, and no disinfectant at 8. CDC says some utilities switch between chlorine and chloramine with the seasons.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Newer results, and everything else. Nitrate, arsenic, fluoride, chromium, uranium and disinfection byproduct results here come from EPA’s national compliance file, which ends in 2019. City of Mountain Home’s own annual report, which it must send you every year, has newer results and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Nov. 28, 2023 to Oct. 17, 2025; EPA’s compliance samples are from March 7, 2012 to Aug. 20, 2019.

Testing your own tap

City of Mountain Home’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Idaho certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Mountain Home’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The lab Idaho certifies closest to the area City of Mountain Home serves, or a kit by mail

The lab Idaho certifies closest to the area City of Mountain Home serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Analytical Laboratories

    Boise, ID · about 37 miles

    Certified for bacteria, minerals and other inorganics, organic chemicals

All 33 certified labs for Idaho⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Idaho certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Idaho’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID ID4200032. Rebuilt from EPA data on Oct. 25, 2026.