Skip to content
TapBuff

City of Kuna

EPA’s and the City of Kuna’s records have results for 38 contaminants in its water; 8 were found.

Serves 32,038 people · Groundwater · Kuna, ID

Serves
32,038 people
Connections
11,363
Water source
Groundwater
Based in
Kuna, ID
County
Ada
Owner
Local government
The 2 ZIP codes it serves

83634, 83642

The short answer

None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

Filters for uranium and arsenic, if you want them lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Oct. 14, 2024 to April 16, 2025.

Uranium, arsenic, nitrate, fluoride, total trihalomethanes (TTHM) and haloacetic acids (HAA5): the annual water quality reports the City of Kuna publishes, 2020 to 2025, with EPA’s 2012 to 2019 file for earlier years.

Chromium (total): EPA’s compliance monitoring file, samples taken from Oct. 16, 2013 to Dec. 19, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

21 ppb

Highest sample, April 16, 2025; found in 10 of 10

The highest sample was 21 ppb, about twice EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 7 results

Uranium and arsenic have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Uranium, Legal limit 30 ppb · health goal zero; highest 26 ppb

Highest result, 2023 · Comes from the source

The highest sample, in 2023, was 26 ppb, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 20 ppb, in 2012.

What handles it

About uranium
Arsenic, Legal limit 10 ppb · health goal zero; highest 8.0 ppb

Highest result, 2021 · Comes from the source

The highest sample, in 2021, was 8.0 ppb, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 7.4 ppb, in 2015.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Nitrate, Legal limit 10 ppm; highest 5.0 ppm

Highest result, 2025 · Comes from the source

The highest sample, in 2025, was 5.0 ppm, below EPA’s legal limit of 10 ppm.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 4.5 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Fluoride, Legal limit 4.0 ppm; highest 0.31 ppm

Highest result, 2025 · Forms or is added in treatment

The highest sample, in 2025, was 0.31 ppm, below EPA’s legal limit of 4.0 ppm.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.35 ppm, in 2016.

What handles it

About fluoride
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest 6.0 ppb

Highest result, 2022 · Forms or is added in treatment

The highest sample, in 2022, was 6.0 ppb, below EPA’s legal limit of 80 ppb.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 7.0 ppb, in 2017.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest 2.0 ppb

Highest result, 2021 · Forms or is added in treatment

The highest sample, in 2021, was 2.0 ppb, below EPA’s legal limit of 60 ppb.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.9 ppb, in 2017.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Chromium (total), Legal limit 100 ppb; highest yearly average 1.7 ppb

Highest yearly average, 2013 to 2019 · 2019 average: 0.75 ppb · Comes from the source

Averaged by year, the highest was 1.7 ppb, in 2013, below EPA’s legal limit of 100 ppb. Its highest single sample was 3.0 ppb. In 2019, the latest year on file, its four samples averaged below the limit.

What handles it

About chromium (total)
Utilities above EPA’s PFAS limits, state by state⁠
30 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 175 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Uranium, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Uranium, Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

One more filter
Compare five-year costs

Every filter for these, those that cover both first⁠

The best reverse osmosis systems, ranked⁠

Disinfectant

City of Kuna reported disinfecting with chlorine, not chloramine, at all 5 of its sampling points, in its 2024 to 2025 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Uranium, arsenic, nitrate, fluoride, total trihalomethanes (TTHM) and haloacetic acids (HAA5) results here are from the annual water quality reports the City of Kuna publishes, from 2020 on, with EPA’s national file for 2012 to 2019. Chromium (total) comes from EPA’s file alone, which ends in 2019: the reports read here give no figure for it across the whole system. City of Kuna’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Oct. 14, 2024 to April 16, 2025; the reports the City of Kuna publishes cover 2020 to 2025; EPA’s compliance samples are from Oct. 16, 2013 to Dec. 19, 2019.

Testing your own tap

City of Kuna’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Idaho certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Kuna’s latest lead sampling in EPA’s records, 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What City of Kuna’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The lab Idaho certifies closest to the area City of Kuna serves, or a kit by mail

The lab Idaho certifies closest to the area City of Kuna serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Analytical Laboratories

    Boise, ID · about 11 miles

    Certified for bacteria, minerals and other inorganics, organic chemicals

All 33 certified labs for Idaho⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Idaho certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Idaho’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID ID4010085. Rebuilt from EPA data on Oct. 25, 2026.