Skip to content
TapBuff

City of Bonners Ferry

EPA’s records have results for 8 contaminants in its water; 3 were found.

Serves 3,367 people · Surface water · Bonners Ferry, ID

Serves
3,367 people
Connections
1,395
Water source
Surface water
Based in
Bonners Ferry, ID
County
Boundary
Owner
Local government
The ZIP code it serves

83805

The short answer

None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

Haloacetic acids (HAA5), total trihalomethanes (TTHM), nitrate, arsenic, chromium (total), fluoride and uranium: EPA’s compliance monitoring file, samples taken from Feb. 14, 2012 to Dec. 11, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Below EPA’s limits, 3 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 50.6 ppb

Highest yearly average, 2012 to 2019 · 2019 average: 30.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 50.6 ppb, in 2014, below EPA’s legal limit of 60 ppb. Its highest single sample was 124 ppb. In 2019, the latest year on file, its eight samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility from 2012 to 2019.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 38.1 ppb

Highest yearly average, 2012 to 2019 · Forms or is added in treatment

Averaged by year, the highest was 38.1 ppb, in 2019, below EPA’s legal limit of 80 ppb. Its highest single sample was 95 ppb. That was also the latest year on file. EPA recorded no violation for total trihalomethanes (TTHM) at this utility from 2012 to 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest 0.062 ppm

Highest sample; found in 1 of 7 · 2019: not found · Comes from the source

The highest sample, in 2018, was 0.062 ppm, below EPA’s legal limit of 10 ppm. In 2019, the latest year on file, it wasn’t found in its one sample.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
5 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Fluoride
  • Lead
  • Uranium

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Newer results, and everything else. Nitrate, arsenic, fluoride, chromium, uranium and disinfection byproduct results here come from EPA’s national compliance file, which ends in 2019. City of Bonners Ferry’s own annual report, which it must send you every year, has newer results and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; EPA’s compliance samples are from Feb. 14, 2012 to Dec. 11, 2019.

Testing your own tap

City of Bonners Ferry’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Idaho certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Bonners Ferry’s latest lead sampling in EPA’s records, 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
Labs Idaho certifies, or a kit by mail

No lab Idaho certifies is within 75 miles of the area City of Bonners Ferry serves on the state’s list. Some take samples by mail; the state’s page lists them all.

All 33 certified labs for Idaho⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Idaho certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Idaho’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID ID1110003. Rebuilt from EPA data on Oct. 25, 2026.