Skip to content
TapBuff

Waipio Heights

EPA’s records have results for 38 contaminants in its water; 4 were found.

Serves 11,516 people · Groundwater · Waipio, HI

Serves
11,516 people
Connections
2,255
Water source
Groundwater
Based in
Waipio, HI
County
Honolulu
Owner
Local government
The 2 ZIP codes it serves

96789, 96797

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 23 to Nov. 3, 2023.

Nitrate, fluoride, chromium (total), total trihalomethanes (TTHM), arsenic, haloacetic acids (HAA5) and uranium: EPA’s compliance monitoring file, samples taken from March 7, 2012 to Oct. 2, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 4 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Nitrate, Legal limit 10 ppm; highest 2.4 ppm

Highest sample; found in 18 of 18 · 2019 average: 0.94 ppm · Comes from the source

The highest sample, in 2012, was 2.4 ppm, below EPA’s legal limit of 10 ppm. In 2019, the latest year on file, its two samples averaged below the limit.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.14 ppm

Highest yearly average, 2012 to 2019 · 2019 average: 0.09 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.14 ppm, in 2012, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.17 ppm. In 2019, the latest year on file, its two samples averaged below the limit.

What handles it

About fluoride
Chromium (total), Legal limit 100 ppb; highest yearly average 1.8 ppb

Highest yearly average, 2014 to 2017 · Comes from the source

Averaged by year, the highest was 1.8 ppb, in 2017, below EPA’s legal limit of 100 ppb. Its highest single sample was 2.0 ppb. That was also the latest year on file.

What handles it

About chromium (total)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 1.0 ppb

Highest yearly average, 2012 to 2019 · 2019 average: 0.38 ppb · Forms or is added in treatment

Averaged by year, the highest was 1.0 ppb, in 2017, below EPA’s legal limit of 80 ppb. Its highest single sample was 2.4 ppb. In 2019, the latest year on file, its four samples averaged below the limit.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Utilities above EPA’s PFAS limits, state by state⁠
34 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Haloacetic acids (HAA5)
  • Lead
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Disinfectant

Waipio Heights reported disinfecting with chlorine, not chloramine, at all 2 of its sampling points, in its 2023 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Newer results, and everything else. Nitrate, arsenic, fluoride, chromium, uranium and disinfection byproduct results here come from EPA’s national compliance file, which ends in 2019. Waipio Heights’s own annual report, which it must send you every year, has newer results and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 23 to Nov. 3, 2023; EPA’s compliance samples are from March 7, 2012 to Oct. 2, 2019.

Testing your own tap

Waipio Heights’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Hawaii certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Waipio Heights’s latest lead sampling in EPA’s records, 2016 to 2018, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 2 labs Hawaii certifies closest to the area Waipio Heights serves, or a kit by mail

The 2 labs Hawaii certifies closest to the area Waipio Heights serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • AECOS, Inc. - Kaneohe

    Kaneohe, HI · about 8 miles

    Certified for bacteria

    (808) 234-7770

  • FQLabs - Honolulu

    Honolulu, HI · about 9 miles

    Certified for bacteria

    (808) 839-9444

All 12 certified labs for Hawaii⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Hawaii certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Hawaii’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID HI0000334. Rebuilt from EPA data on Oct. 25, 2026.