Skip to content
TapBuff

Wailuku

EPA’s and the County of Maui Department of Water Supply’s records have results for 38 contaminants in its water; 5 were found.

Serves 74,511 people · Surface water · Wailuku, HI

Serves
74,511 people
Connections
20,287
Water source
Surface water
Based in
Wailuku, HI
County
Maui
Owner
Local government
The 6 ZIP codes it serves

96732, 96733, 96753, 96779, 96784, 96793

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 17 to Dec. 18, 2023.

Total trihalomethanes (TTHM), nitrate, haloacetic acids (HAA5) and fluoride: the annual water quality reports the County of Maui Department of Water Supply publishes, 2025, with EPA’s 2012 to 2019 file for earlier years.

Chromium (total), arsenic and uranium: EPA’s compliance monitoring file, samples taken from March 29, 2012 to Feb. 4, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 5 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest 46 ppb

Highest result, 2025 · Forms or is added in treatment

The highest sample, in 2025, was 46 ppb, below EPA’s legal limit of 80 ppb.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 15.3 ppb, in 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest 2.5 ppm

Highest result, 2025 · Comes from the source

The highest sample, in 2025, was 2.5 ppm, below EPA’s legal limit of 10 ppm.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 3.2 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Haloacetic acids (HAA5), Legal limit 60 ppb; highest 12 ppb

Highest result, 2025 · Forms or is added in treatment

The highest sample, in 2025, was 12 ppb, below EPA’s legal limit of 60 ppb.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.9 ppb, in 2019.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest 0.2 ppm

Highest result, 2025 · Forms or is added in treatment

The highest sample, in 2025, was 0.2 ppm, below EPA’s legal limit of 4.0 ppm.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.1 ppm, in 2012.

What handles it

About fluoride
Chromium (total), Legal limit 100 ppb; highest yearly average 2.2 ppb

Highest yearly average, 2012 to 2019 · 2019: not found · Comes from the source

Averaged by year, the highest was 2.2 ppb, in 2013, below EPA’s legal limit of 100 ppb. Its highest single sample was 4.7 ppb. In 2019, the latest year on file, it wasn’t found in its one sample.

What handles it

About chromium (total)
Utilities above EPA’s PFAS limits, state by state⁠
33 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Lead
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Disinfectant

Wailuku reported disinfecting with chlorine, not chloramine, at all 11 of its sampling points, in its 2023 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), nitrate, haloacetic acids (HAA5) and fluoride results here are from the annual water quality reports the County of Maui Department of Water Supply publishes, from 2025 on, with EPA’s national file for 2012 to 2019. Chromium (total), arsenic and uranium come from EPA’s file alone, which ends in 2019: the reports read here give no figure for them across the whole system. Wailuku’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 17 to Dec. 18, 2023; the reports the County of Maui Department of Water Supply publishes cover 2025; EPA’s compliance samples are from March 29, 2012 to Feb. 4, 2019.

Testing your own tap

Wailuku’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Hawaii certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Wailuku’s latest lead sampling in EPA’s records, 2016 to 2018, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
Labs Hawaii certifies, or a kit by mail

No lab Hawaii certifies is within 75 miles of the area Wailuku serves on the state’s list. Some take samples by mail; the state’s page lists them all.

All 12 certified labs for Hawaii⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Hawaii certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Hawaii’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID HI0000212. Rebuilt from EPA data on Oct. 25, 2026.