Skip to content
TapBuff

North Kona

EPA’s and the Hawaii County Department of Water Supply’s records have results for 38 contaminants in its water; 6 were found.

Serves 29,581 people · Groundwater · North Kona, HI

Serves
29,581 people
Connections
10,956
Water source
Groundwater
Based in
North Kona, HI
County
Hawaii
Owner
Local government
The 5 ZIP codes it serves

96725, 96739, 96740, 96745, 96750

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

Filters for uranium and arsenic, if you want them lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Oct. 14, 2024 to April 22, 2025.

Fluoride, nitrate, uranium, total trihalomethanes (TTHM) and chromium (total): the annual water quality reports the Hawaii County Department of Water Supply publishes, 2025, with EPA’s 2012 to 2019 file for earlier years.

Arsenic and haloacetic acids (HAA5): EPA’s compliance monitoring file, samples taken from April 16, 2012 to Sept. 9, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 6 results

Uranium and arsenic have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Fluoride, Legal limit 4.0 ppm; highest 0.76 ppm

Highest result, 2025 · Forms or is added in treatment

The highest sample, in 2025, was 0.76 ppm, below EPA’s legal limit of 4.0 ppm.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.36 ppm, in 2018.

What handles it

About fluoride
Nitrate, Legal limit 10 ppm; highest 1.6 ppm

Highest result, 2025 · Comes from the source

The highest sample, in 2025, was 1.6 ppm, below EPA’s legal limit of 10 ppm.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 1.2 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Uranium, Legal limit 30 ppb · health goal zero; highest 2.5 ppb

Highest result, 2025 · Comes from the source

The highest sample, in 2025, was 2.5 ppb, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.4 ppb, in 2018.

What handles it

About uranium
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest 5.0 ppb

Highest result, 2025 · Forms or is added in treatment

The highest sample, in 2025, was 5.0 ppb, below EPA’s legal limit of 80 ppb.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 5.7 ppb, in 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Chromium (total), Legal limit 100 ppb; highest 4.8 ppb

Highest result, 2025 · Comes from the source

The highest sample, in 2025, was 4.8 ppb, below EPA’s legal limit of 100 ppb.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.6 ppb, in 2018.

What handles it

About chromium (total)
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 0.28 ppb

Highest yearly average, 2012 to 2019 · 2019: not found · Comes from the source

Averaged by year, the highest was 0.28 ppb, in 2018, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 1.1 ppb. In 2019, the latest year on file, it wasn’t found in its one sample.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Utilities above EPA’s PFAS limits, state by state⁠
32 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Haloacetic acids (HAA5)
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Uranium, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Uranium, Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

One more filter
Compare five-year costs

Every filter for these, those that cover both first⁠

The best reverse osmosis systems, ranked⁠

Disinfectant

North Kona reported disinfecting with chlorine, not chloramine, at all 11 of its sampling points, in its 2024 to 2025 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Fluoride, nitrate, uranium, total trihalomethanes (TTHM) and chromium (total) results here are from the annual water quality reports the Hawaii County Department of Water Supply publishes, from 2025 on, with EPA’s national file for 2012 to 2019. Arsenic and haloacetic acids (HAA5) come from EPA’s file alone, which ends in 2019: the reports read here give no figure for them across the whole system. North Kona’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Oct. 14, 2024 to April 22, 2025; the reports the Hawaii County Department of Water Supply publishes cover 2025; EPA’s compliance samples are from April 16, 2012 to Sept. 9, 2019.

Testing your own tap

North Kona’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Hawaii certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. North Kona’s latest lead sampling in EPA’s records, 2019 to 2021, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
Labs Hawaii certifies, or a kit by mail

No lab Hawaii certifies is within 75 miles of the area North Kona serves on the state’s list. Some take samples by mail; the state’s page lists them all.

All 12 certified labs for Hawaii⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Hawaii certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Hawaii’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID HI0000131. Rebuilt from EPA data on Oct. 25, 2026.