Skip to content
TapBuff

St. Simons Island

EPA’s and the Brunswick-Glynn County Joint Water and Sewer Commission’s records have results for 34 contaminants in its water; 5 were found.

Serves 29,249 people · Groundwater · Saint Simons Island, GA

Serves
29,249 people
Connections
11,935
Water source
Groundwater
Based in
Saint Simons Island, GA
County
Glynn
Owner
Local government
The ZIP code it serves

31522

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

Filters for lead, if you want it lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from April 9 to Oct. 15, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2006 to 2025.

Total trihalomethanes (TTHM), fluoride and haloacetic acids (HAA5): the annual water quality reports the Brunswick-Glynn County Joint Water and Sewer Commission publishes, 2020 to 2024.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 5 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
Lithium, Health reference level 10 ppb; highest 9.2 ppb

Highest sample, Oct. 15, 2024; found in 2 of 6 · Comes from the source

The highest sample was 9.2 ppb, below EPA’s health reference level of 10 ppb. Lithium has no legal limit or health goal of its own.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report
About lithium
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest 29.7 ppb

Highest result, 2024 · Forms or is added in treatment

The highest sample, in 2024, was 29.7 ppb, below EPA’s legal limit of 80 ppb.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest 0.79 ppm

Highest result, 2022 · Forms or is added in treatment

The highest sample, in 2022, was 0.79 ppm, below EPA’s legal limit of 4.0 ppm.

What handles it

About fluoride
Lead, Action level 15 ppb · health goal zero; 90th percentile 2.3 ppb

90th percentile, 2023 to 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 2.3 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Haloacetic acids (HAA5), Legal limit 60 ppb; highest 4.5 ppb

Highest result, 2024 · Forms or is added in treatment

The highest sample, in 2024, was 4.5 ppb, below EPA’s legal limit of 60 ppb.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Georgia utilities above EPA’s PFAS limits⁠
29 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for lead, ranked⁠

Disinfectant

St. Simons Island reported disinfecting with chlorine, not chloramine, at all 3 of its sampling points, in its 2024 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), fluoride and haloacetic acids (HAA5) results here are from the annual water quality reports the Brunswick-Glynn County Joint Water and Sewer Commission publishes, from 2020 on. St. Simons Island’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from April 9 to Oct. 15, 2024; the reports the Brunswick-Glynn County Joint Water and Sewer Commission publishes cover 2020 to 2024.

Testing your own tap

St. Simons Island’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Georgia certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. St. Simons Island’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 2.3 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Georgia certifies closest to the area St. Simons Island serves, or a kit by mail

The 3 labs Georgia certifies closest to the area St. Simons Island serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Woodward Sapp

    Brunswick, GA · about 10 miles

    Certified for bacteria

    (912) 265-2603

  • Coastal H2O

    Savannah, GA · about 52 miles

    Certified for bacteria

    (912) 352-4311

  • Tindal Enterprises/Altamaha Laboratories

    Blackshear, GA · about 54 miles

    Certified for bacteria

    (912) 449-0999

All 43 certified labs for Georgia⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Georgia certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Georgia’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID GA1270001. Rebuilt from EPA data on Oct. 25, 2026.