Skip to content
TapBuff

Sugarloaf Water Treatment Plant

EPA’s and Florida’s records have results for 7 contaminants in its water; 5 were found.

Serves 5,807 people · Groundwater · Clermont, FL

Serves
5,807 people
Connections
1,157
Water source
Groundwater
Based in
Clermont, FL
County
Lake
Owner
Local government

The short answer

None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

Total trihalomethanes (TTHM), nitrate, haloacetic acids (HAA5), fluoride, chromium (total) and arsenic: Florida’s own results, samples taken from April 28, 2020 to July 9, 2024, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Below EPA’s limits, 5 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 45.8 ppb

Highest yearly average, 2020 to 2024 · Forms or is added in treatment

Averaged by year, the highest was 45.8 ppb, in 2024, below EPA’s legal limit of 80 ppb. Its highest single sample was 50.7 ppb. That was also the latest year on file.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest 5.5 ppm

Highest sample; found in 7 of 9 · 2024 average: 0.046 ppm · Comes from the source

The highest sample, in 2020, was 5.5 ppm, below EPA’s legal limit of 10 ppm. In 2024, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.22 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 21.3 ppb

Highest yearly average, 2020 to 2024 · 2024 average: 12.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 21.3 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 24.6 ppb. In 2024, the latest year on file, its two samples averaged below the limit.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.14 ppm

Highest yearly average, 2020 to 2024 · 2024 average: 0.12 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.14 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. In 2024, the latest year on file, its two samples averaged below the limit.

What handles it

About fluoride
Chromium (total), Legal limit 100 ppb; highest yearly average 1.5 ppb

Highest yearly average, 2020 to 2024 · 2024: not found · Comes from the source

Averaged by year, the highest was 1.5 ppb, in 2020, below EPA’s legal limit of 100 ppb. In 2024, the latest year on file, it wasn’t found in its one sample.

What handles it

About chromium (total)
2 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Lead

Violations since 2016

No health-based violations on file with EPA since 2016. There are 8 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), nitrate, haloacetic acids (HAA5), fluoride, chromium (total) and arsenic results here are Florida’s own from 2020 on, with EPA’s national file for 2012 to 2019. Sugarloaf Water Treatment Plant’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Florida’s results run from April 28, 2020 to July 9, 2024.

Testing your own tap

Sugarloaf Water Treatment Plant’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Florida certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Sugarloaf Water Treatment Plant’s latest lead sampling in EPA’s records, 2023, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
Labs Florida certifies, or a kit by mail

No lab Florida certifies is within 75 miles of the area Sugarloaf Water Treatment Plant serves on the state’s list. Some take samples by mail; the state’s page lists them all.

All 212 certified labs for Florida⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Florida certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Florida’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID FL3354968. Rebuilt from EPA data on Oct. 25, 2026.