Dewey Beach Water Department
EPA’s and Delaware’s records have results for 35 contaminants in its water; 9 were found.
Serves 31,000 people · Groundwater bought from another system · Dewey Beach, DE
- Serves
- 31,000 people
- Connections
- 2,771
- Water source
- Groundwater bought from another system
- Based in
- Dewey Beach, DE
- County
- Sussex
- Owner
- Local government
The short answer
None of the results here is above a limit in force today. PFOA is above EPA’s new limit, which takes effect in 2029. No health-based violations on file since 2016.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from June 17 to Dec. 9, 2024.
Nitrate, fluoride, total trihalomethanes (TTHM) and haloacetic acids (HAA5): Delaware’s own results, samples taken from Feb. 26, 2020 to July 15, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health benchmark:
- A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
PFAS: PFOA, PFHxS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Two other PFAS with no federal limit were found, the highest PFHxA at 4.2 ppt: see them below.
Above EPA’s new limit, which takes effect in 2029, 1 result
PFOA
Comes from the source
11 ppt
Highest sample, Dec. 9, 2024; found in 2 of 2
The highest sample was 11 ppt, about 2.8 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.
How it’s judged
Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 9.6 ppt, also above it.
What handles it
- NSF/ANSI 53 look for “PFOA Reduction”
- NSF/ANSI 58 look for “Perfluorooctanoic Acid (PFOA)”
Below EPA’s limits, 6 results
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
- Health benchmark:
- A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Nitrate, Legal limit 10 ppm; highest 5.9 ppm
Highest sample; found in 6 of 6 · 2026, one sample: 5.7 ppm · Comes from the source
The highest sample, in 2023, was 5.9 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was below the limit.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
PFHxS, EPA’s 2029 limit 10 ppt; highest 3.5 ppt
Highest sample, Dec. 9, 2024; found in 1 of 2 · Comes from the source
The highest sample was 3.5 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.55 ppm
Highest yearly average, 2020 to 2026 · 2026, one sample: 0.53 ppm · Forms or is added in treatment
Averaged by year, the highest was 0.55 ppm, in 2023, below EPA’s legal limit of 4.0 ppm. In 2026, the latest year on file, its one sample was below the limit.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 10.6 ppb
Highest yearly average, 2020 to 2025 · 2025, one sample: 5.3 ppb · Forms or is added in treatment
Averaged by year, the highest was 10.6 ppb, in 2023, below EPA’s legal limit of 80 ppb. In 2025, the latest year on file, its one sample was below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 57.6 ppb, in 2016.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 1.2 ppb
Highest yearly average, 2020 to 2025 · 2025: not found · Forms or is added in treatment
Averaged by year, the highest was 1.2 ppb, in 2024, below EPA’s legal limit of 60 ppb. In 2025, the latest year on file, it wasn’t found in its one sample.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 10.7 ppb, in 2019.
What handles it
No certification claim covers this compound yet.
PFBS, Health benchmark 2,000 ppt; highest 5.0 ppt
Highest sample, June 17, 2024; found in 2 of 2 · Comes from the source
The highest sample was 5.0 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
| PFAS | EPA’s limit | Result |
|---|---|---|
| PFOA | 4.0 ppt | Above EPA’s new limit (2029)11 ppt highest, found in 2 of 2 samples. Details |
| PFOS | 4.0 ppt | Not foundNot found in any of 2 samples, below 4 ppt |
| PFHxS | 10 ppt | Below EPA’s limits3.5 ppt highest, found in 1 of 2 samples. Details |
| PFNA | 10 ppt | Not foundNot found in any of 2 samples, below 4 ppt |
| HFPO-DA (GenX) | 10 ppt | Not foundNot found in any of 2 samples, below 5 ppt |
| PFBS | Index only | Below EPA’s limits5.0 ppt highest, found in 2 of 2 samples. Details |
| Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together | 1 | Below EPA’s limits0.18 at its highest sampling location, Treatment Facility |
| Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5. | ||
Also found, with no federal limit
EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.
| Compound | Highest sample | Found in | Certification claim |
|---|---|---|---|
| PFHxA | 4.2 ppt | 2 of 2 | None covers it |
| PFPeA | 3.8 ppt | 2 of 2 | None covers it |
26 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Lead
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- Lithium
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFMBA
- PFMPA
- PFNA
- PFOS
- PFPeS
- PFTA
- PFTrDA
- PFUnA
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOA Reduction” on one listing can read “Perfluorooctanoic Acid (PFOA)” on another.
- NSF/ANSI 53
Claim: PFOA Reduction
For: PFOA
Other certifiers’ wording: Perfluorooctanoic Acid (PFOA)
Other claims that cover it: Total PFAS Reduction
- NSF/ANSI 58
Claim: Perfluorooctanoic Acid (PFOA)
For: PFOA
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.
In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Express Water StreamLine Direct Connect System (USC001)
Under-sink carbon
Five years: $527, household of 3, cartridges included
Certified for: PFOA
Brondell Coral UC300 Under Sink Water Filtration System
Under-sink carbon
Five years: $900, household of 3, cartridges included
Certified for: PFOA
A.O. Smith 2-Stage Under Sink Water Filter (AO-US-200)
Under-sink carbon
Five years: $980, household of 3, cartridges included
Certified for: PFOA
2 more filters
Aquasana Claryum 2-Stage (AQ-6200)
Under-sink carbon
Five years: $990, household of 3, cartridges included
Certified for: PFOA
Aquasana Clean Water Machine (AQ-CWM2)
Countertop
Five years: $1,061, household of 3, cartridges included
Certified for: PFOA
Disinfectant
Dewey Beach Water Department reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2024 sampling for EPA.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
Violations since 2016
No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
What this report can’t tell you
Everything else. Nitrate, fluoride, total trihalomethanes (TTHM) and haloacetic acids (HAA5) results here are Delaware’s own from 2020 on, with EPA’s national file for 2012 to 2019. Dewey Beach Water Department’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from June 17 to Dec. 9, 2024; Delaware’s results run from Feb. 26, 2020 to July 15, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Dewey Beach Water Department’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Dewey Beach Water Department’s results flag: PFOA. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Delaware certifies closest to the area Dewey Beach Water Department serves, or a kit by mail
The 3 labs Delaware certifies closest to the area Dewey Beach Water Department serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Water Testing Laboratories of MD
Salisbury, MD · about 34 miles
Chesapeake Environmental Lab
Stevensville, MD · about 72 miles
Water Testing Laboratories of MD
Stevensville, MD · about 72 miles
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Delaware certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Delaware’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on PFOAWhat it does to health, where it comes from, and the certification claim that addresses it.About PFOA
- Get the utility’s own reportDewey Beach Water Department must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Delaware Division of Public Health, Office of Drinking Water, results from Jan. 2, 2020 to Oct. 9, 2026, read Oct. 17, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: Delaware Office of Drinking Water, approved laboratories, read Oct. 10, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID DE0000825. Rebuilt from EPA data on Oct. 25, 2026.