Skip to content
TapBuff

Marvell Waterworks

EPA’s and Arkansas’s records have results for 37 contaminants in its water; 5 were found.

Serves 1,000 people · Groundwater · Marvell, AR

Serves
1,000 people
Connections
400
Water source
Groundwater
Based in
Marvell, AR
County
Phillips
Owner
Local government
The 2 ZIP codes it serves

72366, 72374

The short answer

Lead is above the action level in the latest monitoring period, ending June 30, 2008. Lithium is above EPA’s health benchmark. 3 health-based violations since 2016, all resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The 3 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Feb. 14 to Aug. 6, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 1992 to 2008.

Haloacetic acids (HAA5), nitrate and total trihalomethanes (TTHM): the annual water quality reports Arkansas writes for each utility, 2020 to 2025, with EPA’s 2012 to 2019 file for earlier years.

Fluoride, arsenic and chromium (total): EPA’s compliance monitoring file, samples taken from Feb. 5, 2012 to April 16, 2018. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Above the legal limit, 1 result

Lead

Comes from pipes, often your own

Above the action level

What it means for you. EPA’s health goal for lead is zero: it can harm health even at low exposure. A utility over the action level must now tell its customers within 24 hours. Meanwhile, use only cold water for drinking, cooking and formula, run the tap after water has sat, and a filter certified for lead, at the tap you drink from, reduces it.

22 ppb

90th percentile, 2008

In the latest period, 9 in 10 homes sampled were at or below 22 ppb, above EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027, and this result is at or above that. EPA’s health goal for lead is zero.

What handles it

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

32.9 ppb

Highest sample, Aug. 6, 2024; found in 2 of 2

The highest sample was 32.9 ppb, about 3.3 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 3 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.67 ppm

Highest yearly average, 2012 to 2018 · 2018, one sample: 0.2 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.67 ppm, in 2013, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.89 ppm. In 2018, the latest year on file, its one sample was below the limit.

What handles it

About fluoride
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 1.5 ppb

Highest yearly average, 2020 to 2025 · 2025: not found · Forms or is added in treatment

Averaged by year, the highest was 1.5 ppb, in 2022, below EPA’s legal limit of 60 ppb. In 2025, the latest year on file, it wasn’t found.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 8.0 ppb, in 2014.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Nitrate, Legal limit 10 ppm; highest 0.15 ppm

Highest result, 2021 · 2021 average: 0.14 ppm · Comes from the source

The highest sample, in 2021, was 0.15 ppm, below EPA’s legal limit of 10 ppm. That is the only year on file, and it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.23 ppm, in 2018.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Utilities above EPA’s PFAS limits, state by state⁠
32 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Total trihalomethanes (TTHM)

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for lead, ranked⁠

Disinfectant

Marvell Waterworks reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2024 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

3 health-based violations since 2016, 2 for the Stage 1 Disinfectants and Disinfection Byproducts Rule and 1 for the Lead and Copper Rule. The latest began June 1, 2018.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Stage 1 Disinfectants and Disinfection Byproducts RuleTreatment was not run by a certified operator as required.EPA: Treatment Technique No Certif. OperatorJune 1, 2018Resolved
May 1, 2018Resolved
Lead and Copper RuleOCCT/SOWT Treatment Installation/DemonstrationApril 1, 2018Resolved

Health-based violations only. 21 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), nitrate and total trihalomethanes (TTHM) results here are from the annual water quality reports Arkansas writes for each utility, from 2020 on, with EPA’s national file for 2012 to 2019. Fluoride, arsenic and chromium (total) come from EPA’s file alone, which ends in 2019. Marvell Waterworks’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 14 to Aug. 6, 2024; the reports Arkansas writes cover 2020 to 2025; EPA’s compliance samples are from Feb. 5, 2012 to April 16, 2018.

Testing your own tap

Marvell Waterworks’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Arkansas certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Marvell Waterworks’s latest lead sampling in EPA’s records, 2008, had a 90th percentile of 22 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Marvell Waterworks’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
Labs Arkansas certifies, or a kit by mail

TapBuff hasn’t read Arkansas’s list of certified labs yet. The national page links every state’s own list.

Certified labs, state by state⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Arkansas certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Arkansas’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID AR0000421. Rebuilt from EPA data on Oct. 25, 2026.