Skip to content
TapBuff

Dardanelle Waterworks

EPA’s and Arkansas’s records have results for 37 contaminants in its water; 8 were found.

Serves 4,517 people · Groundwater · Dardanelle, AR

Serves
4,517 people
Connections
1,826
Water source
Groundwater
Based in
Dardanelle, AR
County
Yell
Owner
Local government
The 2 ZIP codes it serves

72802, 72834

The short answer

None of the results here is above a limit in force today. PFOS had a sample above EPA’s new limit, which takes effect in 2029, but not on average, the way EPA will judge it. 2 health-based violations since 2016, both resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The 2 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Feb. 26 to Aug. 13, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2002 to 2025.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 1.6 ppm, for the period ending June 30, 1998. None since is on file, so it is not counted as a current finding.

Total trihalomethanes (TTHM), nitrate, fluoride and haloacetic acids (HAA5): the annual water quality reports Arkansas writes for each utility, 2020 to 2025, with EPA’s 2012 to 2019 file for earlier years.

Arsenic and chromium (total): EPA’s compliance monitoring file, samples taken from April 3, 2012 to April 2, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: PFOS and PFHxS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. One other PFAS with no federal limit was found, the highest PFBA at 5.9 ppt: see it below.

A sample above EPA’s 2029 limit, below it on average, 1 result

PFOS

Comes from the source

A sample above EPA’s 2029 limit

4.4 ppt

Highest sample, Aug. 13, 2025; found in 1 of 2

The highest sample was 4.4 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Averaged at each sampling location, the way EPA will judge it, it is below the limit.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 2.2 ppt, below it.

What handles it

Below EPA’s limits, 6 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 49 ppb

Highest yearly average, 2020 to 2025 · Forms or is added in treatment

Averaged by year, the highest was 49 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 64.9 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 56.7 ppb, in 2015.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
PFHxS, EPA’s 2029 limit 10 ppt; highest 5.3 ppt

Highest sample, Aug. 13, 2025; found in 2 of 2 · Comes from the source

The highest sample was 5.3 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.

What handles it

About PFHxS
Nitrate, Legal limit 10 ppm; highest 2.3 ppm

Highest result, 2020 · 2025 average: 1.2 ppm · Comes from the source

The highest sample, in 2020, was 2.3 ppm, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 2.2 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.81 ppm

Highest yearly average, 2020 to 2025 · Forms or is added in treatment

Averaged by year, the highest was 0.81 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.0 ppm. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.8 ppm, in 2016.

What handles it

About fluoride
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 12 ppb

Highest yearly average, 2020 to 2025 · Forms or is added in treatment

Averaged by year, the highest was 12 ppb, in 2025, below EPA’s legal limit of 60 ppb. Its highest single sample was 17.7 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 17.3 ppb, in 2013.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.0 ppb

90th percentile, 2023 to 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 1.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 2 samples, below 4 ppt
PFOS4.0 pptA sample above EPA’s 2029 limit4.4 ppt highest, found in 1 of 2 samples. Details
PFHxS10 pptBelow EPA’s limits5.3 ppt highest, found in 2 of 2 samples. Details
PFNA10 pptNot foundNot found in any of 2 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 2 samples, below 5 ppt
PFBSIndex onlyNot foundNot found in any of 2 samples, below 3 ppt
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Utilities above EPA’s PFAS limits, state by state⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFBA5.9 ppt1 of 2None covers it
29 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: PFOS Reduction, Lead Reduction

    For: PFOS, Lead

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS)

    Other claims that cover it: Total PFAS Reduction

  • NSF/ANSI 58

    Claims: Perfluorooctane Sulfonate (PFOS), Lead Reduction

    For: PFOS, Lead

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for PFAS, ranked⁠

The best water filters for lead, ranked⁠

Disinfectant

Dardanelle Waterworks reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2025 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

2 health-based violations since 2016, all for the Surface Water Treatment Rule. The latest began July 1, 2017.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Surface Water Treatment RuleRequired treatment for surface water or groundwater was not met.EPA: Treatment Technique (SWTR and GWR)July 1, 2017 to July 31, 2017Resolved
Aug. 1, 2016 to Aug. 31, 2016Resolved

Health-based violations only.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), nitrate, fluoride and haloacetic acids (HAA5) results here are from the annual water quality reports Arkansas writes for each utility, from 2020 on, with EPA’s national file for 2012 to 2019. Arsenic and chromium (total) come from EPA’s file alone, which ends in 2019. Dardanelle Waterworks’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 26 to Aug. 13, 2025; the reports Arkansas writes cover 2020 to 2025; EPA’s compliance samples are from April 3, 2012 to April 2, 2019.

Testing your own tap

Dardanelle Waterworks’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Arkansas certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Dardanelle Waterworks’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 1.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Dardanelle Waterworks’s results flag: PFOS. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
Labs Arkansas certifies, or a kit by mail

TapBuff hasn’t read Arkansas’s list of certified labs yet. The national page links every state’s own list.

Certified labs, state by state⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Arkansas certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Arkansas’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID AR0000601. Rebuilt from EPA data on Oct. 25, 2026.