Scotwood Estates Water System
EPA’s and Alaska’s records have results for 6 contaminants in its water; 1 was found.
Serves 90 people · Groundwater · Wasilla, AK
- Serves
- 90 people
- Connections
- 30
- Water source
- Groundwater
- Based in
- Wasilla, AK
- County
- Matanuska - Susitna Borough
- Owner
- Private
The ZIP code it serves
The short answer
None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. 4 health-based violations since 2016, all resolved in EPA’s file.
What was found
Where these results come from, and when
Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 6.5 ppm, for the period ending Dec. 31, 1997. None since is on file, so it is not counted as a current finding.
Nitrate and arsenic: Alaska’s own results, samples taken from Aug. 15, 2022 to March 24, 2025, with EPA’s 2012 to 2019 file for earlier years.
Chromium (total), fluoride and total trihalomethanes (TTHM): EPA’s compliance monitoring file, samples taken from Aug. 14, 2013 to Sept. 17, 2019. Newer results are in the utility’s annual water quality report.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
Below EPA’s limits, 1 result
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Nitrate, Legal limit 10 ppm; highest 2.6 ppm
One sample · 2024, one sample: 2.6 ppm · Comes from the source
The highest sample, in 2024, was 2.6 ppm, below EPA’s legal limit of 10 ppm. That is the only year on file, and its one sample was below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 4.8 ppm, in 2012.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
5 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
- Arsenic
- Chromium (total)
- Fluoride
- Lead
- Total trihalomethanes (TTHM)
Violations since 2016
4 health-based violations since 2016, all for the Groundwater Rule. The latest began July 27, 2019.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| Groundwater Rule | A significant problem found in a state inspection was not fixed on time.EPA: Failure To Address Deficiency | July 27, 2019 | Resolved |
| July 27, 2019 | Resolved | ||
| July 27, 2019 | Resolved | ||
| July 27, 2019 | Resolved |
Health-based violations only. 1 monitoring or reporting violation not shown.
What this report can’t tell you
Everything else. Nitrate and arsenic results here are Alaska’s own from 2022 on, with EPA’s national file for 2012 to 2019. Chromium (total), fluoride and total trihalomethanes (TTHM) come from EPA’s file alone, which ends in 2019. Scotwood Estates Water System’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Alaska’s results run from Aug. 15, 2022 to March 24, 2025; EPA’s compliance samples are from Aug. 14, 2013 to Sept. 17, 2019.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Scotwood Estates Water System’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Alaska certifies closest to the area Scotwood Estates Water System serves, or a kit by mail
The 3 labs Alaska certifies closest to the area Scotwood Estates Water System serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Alaska Water Laboratories, LLC
Wasilla, AK · under a mile
Certified for bacteria, nitrate, minerals and other inorganics
Erdman & Associates
Wasilla, AK · under a mile
Certified for bacteria
SGS North America Inc.- Anchorage, AK
Anchorage, AK · about 20 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Alaska certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Alaska’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Decide if you want a filter at allA filter for taste or chlorine is a preference, not a need. The standards say what each kind can do.NSF/ANSI standards, decoded
- Get the utility’s own reportScotwood Estates Water System must send you a water quality report every year. It covers contaminants this page does not show, and has newer results than EPA’s national file for the ones here that come from it.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Alaska Department of Environmental Conservation, Drinking Water Viewer, results from Jan. 4, 2020 to Oct. 14, 2026, read Oct. 24, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Certified labs: ADEC, laboratories certified to analyze drinking water (microbiological and chemical), read Oct. 16, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID AK2223145. Rebuilt from EPA data on Oct. 25, 2026.