Skip to content
TapBuff

Port Protection

EPA’s and Alaska’s records have results for 5 contaminants in its water; 1 was found.

Serves 60 people · Groundwater influenced by surface water · Ketchikan, AK

Serves
60 people
Connections
36
Water source
Groundwater influenced by surface water
Based in
Ketchikan, AK
County
Ketchikan Gateway Borough
Owner
Local government
The ZIP code it serves

99927

The short answer

None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. 11 health-based violations since 2016, 4 with no fix on record in EPA’s file.

The 11 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

Nitrate: Alaska’s own results, samples taken from May 12, 2020 to June 23, 2026, with EPA’s 2012 to 2019 file for earlier years.

Arsenic, chromium (total) and fluoride: EPA’s compliance monitoring file, samples taken from June 2, 2015 to March 6, 2018. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Below EPA’s limits, 1 result

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Nitrate, Legal limit 10 ppm; highest 0.46 ppm

Highest sample; found in 7 of 7 · 2026, one sample: 0.37 ppm · Comes from the source

The highest sample, in 2025, was 0.46 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.21 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
4 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Fluoride
  • Lead

Violations since 2016

11 health-based violations since 2016, 9 for the Revised Total Coliform Rule and 2 for the Surface Water Treatment Rule. The latest began July 19, 2025, and 4 have no fix on record in EPA’s file.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Revised Total Coliform RuleColiform results required a check of the system, and the check or its fixes were not done on time.EPA: Treatment Technique, Level 1 Assessment (RTCR)July 19, 2025No fix on recordEPA: unaddressed
Revised Total Coliform RuleE. coli was confirmed in the water system.EPA: Maximum Contaminant Level Violation, E. coli (RTCR)Dec. 1, 2024 to Dec. 31, 2024Resolved
Revised Total Coliform RuleFixes required after coliform results were not made on time.EPA: Treatment Technique, Corrective/Expedited Actions (RTCR)Oct. 3, 2023No fix on recordEPA: addressed
Revised Total Coliform RuleE. coli was confirmed in the water system.EPA: Maximum Contaminant Level Violation, E. coli (RTCR)Sept. 1, 2023 to Sept. 30, 2023Resolved
June 1, 2023 to June 30, 2023Resolved
The other 6, back to 2021
Earlier health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Revised Total Coliform RuleE. coli was confirmed in the water system.EPA: Maximum Contaminant Level Violation, E. coli (RTCR)Oct. 1, 2022 to Oct. 31, 2022Resolved
Aug. 1, 2022 to Aug. 31, 2022Resolved
Revised Total Coliform RuleColiform or E. coli results required a detailed review of the system, and it or its fixes were not done on time.EPA: Treatment Technique, Level 2 Assessment (RTCR)Nov. 4, 2021Resolved
Surface Water Treatment RuleWater drawn from a river, lake or reservoir was not filtered as required.EPA: Failure to Filter (SWTR)Sept. 20, 2021No fix on recordEPA: addressed
Revised Total Coliform RuleE. coli was confirmed in the water system.EPA: Maximum Contaminant Level Violation, E. coli (RTCR)Sept. 1, 2021 to Sept. 30, 2021Resolved
Surface Water Treatment RuleRequired treatment for surface water or groundwater was not met.EPA: Treatment Technique (SWTR and GWR)Sept. 1, 2021 to Sept. 30, 2021No fix on recordEPA: archived

Health-based violations only. 25 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Nitrate results here are Alaska’s own from 2020 on, with EPA’s national file for 2012 to 2019. Arsenic, chromium (total) and fluoride come from EPA’s file alone, which ends in 2019. Port Protection’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Alaska’s results run from May 12, 2020 to June 23, 2026; EPA’s compliance samples are from June 2, 2015 to March 6, 2018.

Testing your own tap

Port Protection’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Alaska certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Port Protection’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The lab Alaska certifies closest to the area Port Protection serves, or a kit by mail

The lab Alaska certifies closest to the area Port Protection serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Petersburg Medical Center Laboratory

    Petersburg, AK · about 49 miles

    Certified for bacteria

    (907) 772-4291

All 37 certified labs for Alaska⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Alaska certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Alaska’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID AK2121123. Rebuilt from EPA data on Oct. 25, 2026.