Skip to content
TapBuff

Kongiganak Water System

EPA’s and Alaska’s records have results for 8 contaminants in its water; 5 were found.

Serves 547 people · Surface water · Kongiganak, AK

Serves
547 people
Connections
3
Water source
Surface water
Based in
Kongiganak, AK
County
Bethel Census Area
Owner
Native American
The ZIP code it serves

99559

The short answer

Copper is above the action level in the latest monitoring period, ending Dec. 31, 2025. 23 health-based violations since 2016, all resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The 23 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

Lead and copper: EPA SDWIS monitoring periods ending 2013 to 2025.

Haloacetic acids (HAA5), total trihalomethanes (TTHM) and nitrate: Alaska’s own results, samples taken from Jan. 13, 2020 to April 23, 2025, with EPA’s 2012 to 2019 file for earlier years.

Arsenic, chromium (total) and fluoride: EPA’s compliance monitoring file, samples taken from April 11, 2013 to Aug. 19, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Above the legal limit, 1 result

Copper

Comes from pipes, often your own

Above the action level

What it means for you. EPA’s concern is stomach and intestinal distress from short-term exposure, and liver or kidney damage over years. A filter certified for it, at the tap you drink from, reduces it.

1.5 ppm

90th percentile, 2025

In the latest period, 9 in 10 homes sampled were at or below 1.5 ppm, above EPA’s action level of 1.3 ppm.

What handles it

Below EPA’s limits, 4 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 33 ppb

Highest yearly average, 2020 · Forms or is added in treatment

Averaged by year, the highest was 33 ppb, in 2020, below EPA’s legal limit of 60 ppb. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 21 ppb, in 2014.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Lead, Action level 15 ppb · health goal zero; 90th percentile 4.5 ppb

90th percentile, 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 4.5 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 5.5 ppb

Highest yearly average, 2020 · Forms or is added in treatment

Averaged by year, the highest was 5.5 ppb, in 2020, below EPA’s legal limit of 80 ppb. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 10.1 ppb, in 2013.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest 0.11 ppm

Highest sample; found in 4 of 6 · 2025, one sample: 0.09 ppm · Comes from the source

The highest sample, in 2024, was 0.11 ppm, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.24 ppm, in 2013.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
3 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Fluoride
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Copper Reduction, Lead Reduction

    For: Copper, Lead

  • NSF/ANSI 58

    Claims: Copper Reduction, Lead Reduction

    For: Copper, Lead

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for lead, ranked⁠

Violations since 2016

23 health-based violations since 2016, 13 for the Surface Water Treatment Rule and 10 for the Interim Enhanced Surface Water Treatment Rule. The latest began Sept. 1, 2021.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Surface Water Treatment RuleRequired treatment for surface water or groundwater was not met.EPA: Treatment Technique (SWTR and GWR)Sept. 1, 2021 to Sept. 30, 2021Resolved
Interim Enhanced Surface Water Treatment RuleToo many readings in a month showed cloudiness above the filtration standard.EPA: Monthly Turbidity Exceed (Enhanced SWTR)June 1, 2021 to June 30, 2021Resolved
Surface Water Treatment RuleRequired treatment for surface water or groundwater was not met.EPA: Treatment Technique (SWTR and GWR)March 1, 2021 to March 31, 2021Resolved
Interim Enhanced Surface Water Treatment RuleToo many readings in a month showed cloudiness above the filtration standard.EPA: Monthly Turbidity Exceed (Enhanced SWTR)Dec. 1, 2020 to Dec. 31, 2020Resolved
Sept. 1, 2020 to Sept. 30, 2020Resolved
The other 18, back to 2016
Earlier health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Interim Enhanced Surface Water Treatment RuleToo many readings in a month showed cloudiness above the filtration standard.EPA: Monthly Turbidity Exceed (Enhanced SWTR)March 1, 2020 to March 31, 2020Resolved
Surface Water Treatment RuleRequired treatment for surface water or groundwater was not met.EPA: Treatment Technique (SWTR and GWR)Jan. 1, 2020 to Jan. 31, 2020Resolved
Interim Enhanced Surface Water Treatment RuleToo many readings in a month showed cloudiness above the filtration standard.EPA: Monthly Turbidity Exceed (Enhanced SWTR)Jan. 1, 2020 to Jan. 31, 2020Resolved
Dec. 1, 2019 to Dec. 31, 2019Resolved
Nov. 1, 2019 to Nov. 30, 2019Resolved
Surface Water Treatment RuleRequired treatment for surface water or groundwater was not met.EPA: Treatment Technique (SWTR and GWR)Nov. 1, 2019 to Nov. 30, 2019Resolved
Interim Enhanced Surface Water Treatment RuleToo many readings in a month showed cloudiness above the filtration standard.EPA: Monthly Turbidity Exceed (Enhanced SWTR)Oct. 1, 2019 to Oct. 31, 2019Resolved
Sept. 1, 2019 to Sept. 30, 2019Resolved
Aug. 1, 2019 to Aug. 31, 2019Resolved
Surface Water Treatment RuleRequired treatment for surface water or groundwater was not met.EPA: Treatment Technique (SWTR and GWR)Aug. 1, 2019 to Aug. 31, 2019Resolved
March 1, 2019 to March 31, 2019Resolved
Feb. 1, 2019 to Feb. 28, 2019Resolved
Jan. 1, 2019 to Jan. 31, 2019Resolved
Dec. 1, 2018 to Dec. 31, 2018Resolved
Oct. 1, 2016 to Oct. 31, 2016Resolved
Sept. 1, 2016 to Sept. 30, 2016Resolved
Aug. 1, 2016 to Aug. 31, 2016Resolved
July 1, 2016 to July 31, 2016Resolved

Health-based violations only. 576 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM) and nitrate results here are Alaska’s own from 2020 on, with EPA’s national file for 2012 to 2019. Arsenic, chromium (total) and fluoride come from EPA’s file alone, which ends in 2019. Kongiganak Water System’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Alaska’s results run from Jan. 13, 2020 to April 23, 2025; EPA’s compliance samples are from April 11, 2013 to Aug. 19, 2019.

Testing your own tap

Kongiganak Water System’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Alaska certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Kongiganak Water System’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 4.5 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The lab Alaska certifies closest to the area Kongiganak Water System serves, or a kit by mail

The lab Alaska certifies closest to the area Kongiganak Water System serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • YKHC Water Lab

    Bethel, AK · under a mile

    Certified for bacteria

    (907) 543-6421

All 37 certified labs for Alaska⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Alaska certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Alaska’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID AK2271025. Rebuilt from EPA data on Oct. 25, 2026.