Skip to content
TapBuff

Jber - Elmendorf

EPA’s and Alaska’s records have results for 34 contaminants in its water; 3 were found.

Serves 30,003 people · Surface water bought from another system · Elmendorf Air Force Base, AK

Serves
30,003 people
Connections
2,010
Water source
Surface water bought from another system
Based in
Elmendorf Air Force Base, AK
County
Anchorage Municipality
Owner
Federal government
The 2 ZIP codes it serves

99505, 99506

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Feb. 7 to Nov. 27, 2023.

Haloacetic acids (HAA5), total trihalomethanes (TTHM) and nitrate: Alaska’s own results, samples taken from Feb. 27, 2020 to Aug. 19, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 3 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 20.9 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 14.1 ppb · Forms or is added in treatment

Averaged by year, the highest was 20.9 ppb, in 2022, below EPA’s legal limit of 60 ppb. Its highest single sample was 38.2 ppb. In 2026, the latest year on file, its eight samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 23.2 ppb, in 2013.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 20.2 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 11.4 ppb · Forms or is added in treatment

Averaged by year, the highest was 20.2 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 40.8 ppb. In 2026, the latest year on file, its eight samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 26.6 ppb, in 2013.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest 0.69 ppm

Highest sample; found in 9 of 9 · 2026 average: 0.64 ppm · Comes from the source

The highest sample, in 2026, was 0.69 ppm, below EPA’s legal limit of 10 ppm. That was also the latest year on file, and its three samples averaged below the limit.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Utilities above EPA’s PFAS limits, state by state⁠
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 7 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Disinfectant

Jber - Elmendorf reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2023 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM) and nitrate results here are Alaska’s own from 2020 on, with EPA’s national file for 2012 to 2019. Jber - Elmendorf’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 7 to Nov. 27, 2023; Alaska’s results run from Feb. 27, 2020 to Aug. 19, 2026.

Testing your own tap

Jber - Elmendorf’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Alaska certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Jber - Elmendorf’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Alaska certifies closest to the area Jber - Elmendorf serves, or a kit by mail

The 3 labs Alaska certifies closest to the area Jber - Elmendorf serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • SGS North America Inc.- Anchorage, AK

    Anchorage, AK · about 9 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts

    (907) 562-2343

  • Alaska Water Laboratories, LLC

    Wasilla, AK · about 15 miles

    Certified for bacteria, nitrate, minerals and other inorganics

    (907) 373-6130

  • Erdman & Associates

    Wasilla, AK · about 15 miles

    Certified for bacteria

    (907) 376-6989

All 37 certified labs for Alaska⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Alaska certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Alaska’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID AK2211423. Rebuilt from EPA data on Oct. 25, 2026.