Skip to content
TapBuff

Beachside Estates

EPA’s and Alaska’s records have results for 7 contaminants in its water; 2 were found.

Serves 60 people · Groundwater · Kenai, AK

Serves
60 people
Connections
7
Water source
Groundwater
Based in
Kenai, AK
County
Kenai Peninsula Borough
Owner
Private
The ZIP code it serves

99611

The short answer

Copper is above the action level in the latest monitoring period, ending Dec. 31, 2024. 1 health-based violation since 2016, resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The violation⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

Lead and copper: EPA SDWIS monitoring periods ending 2012 to 2024.

Nitrate: Alaska’s own results, samples taken from April 6, 2020 to Aug. 11, 2026, with EPA’s 2012 to 2019 file for earlier years.

Arsenic, chromium (total), fluoride and total trihalomethanes (TTHM): EPA’s compliance monitoring file, samples taken from Oct. 2, 2014 to Feb. 14, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Above the legal limit, 1 result

Copper

Comes from pipes, often your own

Above the action level

What it means for you. EPA’s concern is stomach and intestinal distress from short-term exposure, and liver or kidney damage over years. A filter certified for it, at the tap you drink from, reduces it.

2.2 ppm

90th percentile, 2022 to 2024

In the latest period, 9 in 10 homes sampled were at or below 2.2 ppm, above EPA’s action level of 1.3 ppm.

What handles it

Below EPA’s limits, 1 result

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Nitrate, Legal limit 10 ppm; highest 0.28 ppm

Highest sample; found in 2 of 7 · 2026: not found · Comes from the source

The highest sample, in 2024, was 0.28 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, it wasn’t found in its one sample.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.6 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
5 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Fluoride
  • Lead
  • Total trihalomethanes (TTHM)
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

Violations since 2016

1 health-based violation since 2016 for the Groundwater Rule. It began Nov. 21, 2016.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Groundwater RuleA significant problem found in a state inspection was not fixed on time.EPA: Failure To Address DeficiencyNov. 21, 2016Resolved

Health-based violations only. 8 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Nitrate results here are Alaska’s own from 2020 on, with EPA’s national file for 2012 to 2019. Arsenic, chromium (total), fluoride and total trihalomethanes (TTHM) come from EPA’s file alone, which ends in 2019. Beachside Estates’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Alaska’s results run from April 6, 2020 to Aug. 11, 2026; EPA’s compliance samples are from Oct. 2, 2014 to Feb. 14, 2019.

Testing your own tap

Beachside Estates’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Alaska certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Beachside Estates’s latest lead sampling in EPA’s records, 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Alaska certifies closest to the area Beachside Estates serves, or a kit by mail

The 3 labs Alaska certifies closest to the area Beachside Estates serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • TET - Tauriainen Environmental Testing

    Soldotna, AK · about 17 miles

    Certified for bacteria

    (907) 262-4624

  • SGS North America Inc.- Anchorage, AK

    Anchorage, AK · about 56 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts

    (907) 562-2343

  • Alaska Water Laboratories, LLC

    Wasilla, AK · about 71 miles

    Certified for bacteria, nitrate, minerals and other inorganics

    (907) 373-6130

All 37 certified labs for Alaska⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Alaska certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Alaska’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID AK2243137. Rebuilt from EPA data on Oct. 25, 2026.