Skip to content
TapBuff

Boldo, Water & Fire Protection Authority

EPA’s and Alabama’s records have results for 33 contaminants in its water; 2 were found.

Serves 4,857 people · Surface water bought from another system · Jasper, AL

Serves
4,857 people
Connections
1,619
Water source
Surface water bought from another system
Based in
Jasper, AL
County
Walker
Owner
Local government
The 2 ZIP codes it serves

35501, 35504

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 4 to Dec. 2, 2024.

Haloacetic acids (HAA5) and total trihalomethanes (TTHM): Alabama’s own results, samples taken from Jan. 16, 2020 to July 17, 2026, with EPA’s 2012 to 2019 file for earlier years.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 2 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 28.6 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 21 ppb · Forms or is added in treatment

Averaged by year, the highest was 28.6 ppb, in 2025, below EPA’s legal limit of 60 ppb. Its highest single sample was 47 ppb. In 2026, the latest year on file, its eight samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 16.7 ppb, in 2012.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 26.9 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 24 ppb · Forms or is added in treatment

Averaged by year, the highest was 26.9 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 40 ppb. In 2026, the latest year on file, its eight samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 24.1 ppb, in 2012.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Alabama utilities above EPA’s PFAS limits⁠
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Disinfectant

Boldo, Water & Fire Protection Authority reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2024 sampling for EPA. It also reported chlorine dioxide and permanganate.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5) and total trihalomethanes (TTHM) results here are Alabama’s own from 2020 on, with EPA’s national file for 2012 to 2019. Boldo, Water & Fire Protection Authority’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 4 to Dec. 2, 2024; Alabama’s results run from Jan. 16, 2020 to July 17, 2026.

Testing your own tap

Boldo, Water & Fire Protection Authority’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Alabama certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Boldo, Water & Fire Protection Authority’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Alabama certifies closest to the area Boldo, Water & Fire Protection Authority serves, or a kit by mail

The 3 labs Alabama certifies closest to the area Boldo, Water & Fire Protection Authority serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Sutherland Environmental Testing Laboratory

    Birmingham, AL · about 34 miles

    (205) 581-9500

  • Safety Environmental Services

    Pelham, AL · about 45 miles

    Certified for bacteria

    (205) 823-6200

  • Guardian Systems

    Leeds, AL · about 45 miles

    Certified for bacteria

    (205) 699-6647

All 64 certified labs for Alabama⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Alabama certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Alabama’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID AL0001322. Rebuilt from EPA data on Oct. 25, 2026.